IS 7098 Power Cable

Wires & Cables Area Thickness of EBXL / XLPE Insulation (Nom.) Approx Overall diameter Approx. Wt.of Cable Max.D.C Resistance at 20 deg.C Current Rating For EBXL -XLPE Cables (125°C) Direct in Ground In Duct In Air Current Rating For Chemically Cured XLPE Cables (90°C) Short Circuit Rating for 1sec Direct in Ground In Duct In Air Sq.mm Nos mm mm Kg/Km Ω/KM Dimension of Arm Wire Thickness of Outer Sheath (min) mm mm Part Number Product Construction Siechem Single Core Aluminium Conductor EBXL - XLPE 120°C Insulated Gl wire Armoured Sheathed 1100 V Power cable as per IS 7098 Technical Data ü Operating Temperature : -15°C to +120°C High Insulation resistance at elevated temperature ü Short Circuit Temperature : 280°C ü Bending radius (min) : 12 x Cable dia ü Rated Voltage :1100 V ü Test Voltage : 3 kV for 5 mins. ü Specification : IS 7098 ü Conductor : Aluminium conductor complying with IS 8130 ü Insulation : Electron Beam Cross Linked Polyethylene 120°C ü Armour : GI wire ü Jacket : PVC-ST2 (Optional : FRLS, ZHLS) Application Features ü Transmission and distribution of Power Industrial units ü Commercial and residential places ü Indoor and outdoor uses ü Cable ducts, cable trays conduits Direct burial and underground burial where mechanical damage risk for cables. Al Al Al Al Al Al Al ü Electron Beam Cross Linked. ü Enhanced Mechanical, Electrical, Thermal & Weathering properties. ü Soldering iron resistant ü Resistance to corona effect. ü Easy jointing & termination ü Better resistance to most chemicals & acids ü Low direct electric losses. ü High current carrying capacity. 4 6 10 16 25 35 50 70 95 120 150 185 240 300 400 500 630 1 1 1 6 6 6 6 12 15 18 18 30 34 34 53 53 53 1.0 1.0 1.0 1.0 1.2 1.2 1.3 1.4 1.4 1.5 1.7 1.9 2.0 2.1 2.4 2.6 2.8 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.6 1.6 1.6 1.6 1.6 1.6 2.0 2.0 2.0 1.24 1.24 1.24 1.24 1.24 1.24 1.24 1.24 1.4 1.4 1.4 1.4 1.4 1.56 1.56 1.56 1.72 131 152 176 200 287 331 406 523 655 767 907 1067 1322 1522 2015 2465 2969 10.5 11.0 12.0 12.5 14.5 15.5 17.0 19.5 20.0 22.0 24.0 26.0 29.0 31.0 35.0 38.0 43.0 7.41 4.61 3.08 1.91 1.20 0.868 0.641 0.443 0.320 0.253 0.206 0.164 0.125 0.100 0.0778 0.0605 0.0469 0.38 0.57 0.94 1.5 2.4 3.3 4.7 6.6 9.0 11.3 14.2 17.5 22.6 28.3 37.7 47.2 59.4 Siechem Single CoreAluminium Conductor EBXL - XLPE 120°C InsulatedAlwireArmoured Sheathed 1100 V Power cable as per IS 7098 233SER19XX 233SER23XX 233SER27XX 234SER28XX 234SER30XX 234SER32XX 234SER34XX 234SER37XX 234SER38XX 234SER41XX 234SER4SXX 234SER44XX 234SER46XX 234SER48XX 234SER49XX 234SER50XX 234SER51XX Catalogue No www.siechem.com 232E 17 All information given are in good faith.Siechem's liability is only to replace the defective portion of cables provided the same is mutually established as manufacturing defects within the guarantee period as agreed in writing and Siechem shall not be liable for any compensation or damages. Siechem reserves the right to revise any of the above specifications without prior intimation. Subject to Chennai Jurisdiction. Note : * Cable conforming to IEC 60502 & also available according to customer requirement. * For XLPE 90°C Insulation from 4 to 10 sqmm - 205SER from 16 to 630 sqmm- 206SER . No.of Wires (Min.) 42 52 64 84 110 137 167 216 263 307 354 407 482 558 673 779 906 38 49 59 77 100 121 143 178 212 247 277 316 368 424 485 563 650 45 56 69 89 119 140 169 205 246 279 313 360 415 474 525 599 681 57 71 87 112 149 176 212 258 310 351 394 453 522 597 661 754 858 48 62 74 97 126 152 180 224 267 311 349 398 463 534 611 709 819 55 68 83 109 143 178 217 281 342 399 460 529 627 725 875 1013 1178 CM/L-6819184 IS : 7098 (Pt.1) AS 9100 ISO 45001 ISO 9001 ISO 14001