IS 7098 Power Cable

Wires & Cables Features Area Thickness of EBXL / XLPE Insulation (Nom.) Thickness of Outer Sheath Unarm Approx Overall diameter Approx.Net Wt.of Cable Max.D.C Resistance at 20 deg.C Current Rating For EBXL -XLPE Cables (125°C) Direct in Ground In Duct In Air Current Rating For Chemically Cured XLPE Cables (90°C) Short Circuit Rating for 1sec Direct in Ground In Duct In Air Sq.mm Nos mm mm mm Kg/Km Ω/KM Al ü Operating Temperature : -15°C to +120°C High Insulation resistance at elevated temperature ü Short Circuit Temperature : 280°C ü Bending radius (min) : 12 x Cable dia ü Rated Voltage :1100 V ü Test Voltage : 3 kV for 5 mins. ü Specification : IS 7098 ü Transmission and distribution of Power Industrial units ü Commercial and residential places ü Indoor and outdoor uses ü Cable ducts, cable trays conduits Direct burial and underground burial where mechanical damage risk for cables. ü Electron Beam Cross Linked. ü Enhanced Mechanical, Electrical, Thermal & Weathering properties. ü Soldering iron resistant ü Resistance to corona effect. ü Easy jointing & termination ü Better resistance to most chemicals, oils & acids ü Low direct electric losses. ü High current carrying capacity. Part Number Al Al Al Al Al Al Technical Data Siechem 3 Core Sec Aluminium Conductor EBXL - XLPE 120°C Insulated PVC ST2 Sheathed 1100 V (UA) Power cable as per IS 7098 16 25 35 50 70 95 120 150 185 240 300 400 6 6 6 6 12 15 15 15 30 30 30 53 0.7 0.9 0.9 1.0 1.1 1.1 1.2 1.4 1.6 1.7 1.8 2.0 1.8 2.0 2.0 2.0 2.2 2.2 2.2 2.4 2.6 2.8 3.0 3.2 18 20 22 25 29 32 35 39 44 49 52 57 320 450 560 680 970 1220 1460 1880 2390 3000 3750 4760 1.91 1.20 0.868 0.641 0.443 0.320 0.253 0.206 0.164 0.125 0.100 0.0778 92 117 141 168 207 246 278 315 354 408 462 513 91 114 142 173 221 269 311 360 411 484 558 619 73 93 112 133 164 195 221 250 281 324 367 407 60 77 92 108 133 158 178 202 225 259 293 325 70 88 109 133 170 207 239 277 316 372 429 476 1.5 2.4 3.3 4.7 6.6 9.0 11.3 14.2 17.5 22.6 28.3 37.7 ü Conductor : Aluminium conductor complying with IS 8130 ü Insulation : Electron Beam Cross Linked Polyethylene 120°C ü Jacket : PVC-ST2 (Optional : FRLS, ZHLS) Product Construction Application 0 Siechem 3 Core SecAluminium Conductor EBXL - XLPE 120 C Insulated PVC ST2 Sheathed 1100 V (UA) Power cable as per IS 7098 230E2803 230E3003 230E3203 230E3403 230E3703 230E3803 230E4103 230E4203 230E4403 230E4603 230E4803 230E4903 Catalogue No www.siechem.com 230E 13 All information given are in good faith.Siechem's liability is only to replace the defective portion of cables provided the same is mutually established as manufacturing defects within the guarantee period as agreed in writing and Siechem shall not be liable for any compensation or damages. Siechem reserves the right to revise any of the above specifications without prior intimation. Subject to Chennai Jurisdiction. 76 97 116 136 168 199 224 255 284 326 369 410 Note : * Cable conforming to IEC 60502 & also available according to customer requirement. * For XLPE 90°C Insulation : 202E . No.of Wires (Min.) CM/L-6819184 IS : 7098 (Pt.1) AS 9100 ISO 45001 ISO 9001 ISO 14001