BS 5467 Power cable

Wires & Cables Product Construction Technical Data Area Cond.Min. No.of Wires Thickness of EBXL / XLPE Insulation (Nom.) Thickness of Outer Sheath Approx Overall diameter Approx.Net Wt.of Cable Max.D.C Resistance at 20 deg.C Current Rating For EBXL -XLPE Cables (125°C) Direct in Ground In Duct In Air Current Rating For Chemically Cured XLPE Cables (90°C) Short Circuit Rating for 1sec Direct in Ground In Duct In Air Sq.mm Nos mm mm mm Kg/Km Ω/KM Al Part Number Al Al Al Al Al Al 1.5 2.5 4 6 10 16 25 1 1 1 1 1 7 7 0.6 0.7 0.7 0.7 0.7 0.7 0.9 1.8 1.8 1.8 1.8 1.8 1.8 1.8 11.5 12.8 14.0 15.2 17.2 19.7 23.4 145 181 217 259 335 446 626 - - 0.38 0.57 0.94 1.5 2.4 - - 7.41 4.61 3.08 1.91 1.20 - - 44 56 74 95 122 - - 40 51 66 73 111 - - 40 52 69 91 125 - - 34 43 57 73 94 - - 31 39 51 56 85 - - 31 40 53 70 96 758E1303 758E1603 758E1903 758E2303 758E2703 759E2803 759E3003 ü Operating Temperature : -15°C to +120°C High Insulation resistance at elevated temperature ü Short Circuit Temperature : 280°C ü Bending radius (min) : 12 x Cable dia ü Rated Voltage :600/1000 V ü Test Voltage : 3.5 kV for 5 mins. ü Specification : BS 5467 Siechem 3 Core Round Aluminium Conductor EBXL - XLPE 120°C Insulated PVC Sheathed 600/1000 V (UA) Power cable as per BS 5467 ü Conductor : Aluminium conductor complying with BS 6360 ü Insulation : Electron Beam Cross Linked Polyethylene 120°C ü Inner sheath : PVC ü Jacket : PVC Complying with BS 6746 Application Features ü Transmission and distribution of Power Industrial units ü Commercial and residential places ü Indoor and outdoor uses ü Cable ducts, cable trays conduits Direct burial and underground burial where mechanical damage risk for cables. Siechem 3CoreRound AluminiumConductorEBXL -XLPE 120°C InsulatedPVC Sheathed 600/1000V (UA)Power cableasperBS 5467 ü Electron Beam Cross Linked. ü Enhanced Mechanical, Electrical, Thermal & Weathering properties. ü Soldering iron resistant ü Resistance to corona effect. ü Easy jointing & termination ü Better resistance to most chemicals & acids ü Low direct electric losses. ü High current carrying capacity. Cable conforming to IEC 60502 & VDE-0271 also available according to customer requirement. 758E,759E Catalogue No www.siechem.com All information given are in good faith.Siechem's liability is only to replace the defective portion of cables provided the same is mutually established as manufacturing defects within the guarantee period as agreed in writing and Siechem shall not be liable for any compensation or damages. Siechem reserves the right to revise any of the above specifications without prior intimation. Subject to Chennai Jurisdiction. 12 CM/L-6819184 IS : 7098 (Pt.1) AS 9100 ISO 45001 ISO 9001 ISO 14001