Indian Railway Cables new.cdr

Application Product Construction Technical Data Features Conductor Typical Construction (Nos. x Nos. x mm) Nom. Conductor Dia (mm) Cable Weight (Kg/Km) Nom. Current Rating in Air at 30°C (A) ü Conductor : Annealed Tinned Flexible copper conductor, acc. to IEC 228, Class 5 ü Insulation : Electron Beam Cross Linked Copolymer - Grey ü Outersheath : Electron Beam Cross Linked Copolymer - Black ü Temperature Range ü Rated Voltage ü Short Circuit Temp ü Test Voltage ü Min. Bending Radius ü Flame Retardant ü Specification ü Thin walled EBXL cables for protected permanent installation inside and out side railway rolling stock to connect fixed and moving parts. ü For WAG - 9 / WAP - 5 Locomotive ü Halogen free ü Limited fire hazard type ü Minimum flame spread ü Low smoke emission ü Less toxic fume emission ü Electron Beam Irradiated Cross Linked ü Easy to strip ü Excellent resistance to high & low temperature , Oil, Ozone, Weathering and Abrasion Siechem 4GKW Single Core 1.8 kV Dual Wall Insulated Flexible EBXL Cables for Electric Locomotives Nominal Cross Sectional Area 2 of Core (mm ) Max. Resistance of Conductor at 0 20 C (Ohm/km) Wires & Cables Catalogue No. 871 Part Number 0 Siechem 1C x 6 Sq.mm 1800V EBXL HR 120 C www.siechem.com All information given are in good faith.Siechem's liability is only to replace the defective portion of cables provided the same is mutually established as manufacturing defects within the guarantee period as agreed in writing and Siechem shall not be liable for any compensation or damages. Siechem reserves the right to revise any of the above specifications without prior intimation. Subject to Chennai Jurisdiction. 871130704 871160704 871230704 871270704 871280704 871300704 871320704 871340704 871370704 871380704 871410704 871420704 1.5 2.5 6 10 16 25 35 50 70 95 120 150 1 x 30 x 0.25 1 x 50 x 0.25 1 x 84 x 0.30 1 x 80 x 0.40 7 x 18 x 0.40 7 x 27 x 0.40 7 x 37 x 0.40 7 x 54 x 0.40 12 x 29 x 0.50 12 x 38 x 0.50 19 x 30 x 0.50 19 x 39 x 0.50 1.6 2.1 3.3 4.2 5.5 6.8 7.8 9.5 11.5 12.9 14.8 16.3 2D View Minimum Wall Thickness 0.30 0.30 0.35 0.40 0.50 0.60 0.65 0.70 0.75 0.85 0.95 1.0 0.40 0.40 0.45 0.50 0.70 0.80 0.85 0.90 0.95 1.05 1.15 1.20 Insulation (mm) Sheath (mm) 3.20 ± 0.10 3.70 ± 0.15 5.10 ± 0.15 6.30 ± 0.20 8.30 ± 0.20 10.20 ± 0.30 11.70 ± 0.30 13.60 ± 0.30 16.60 ± 0.30 17.80 ± 0.30 19.60 ± 0.30 21.90 ± 0.30 Cable Dia (mm) 13.7 8.21 3.39 1.95 1.24 0.795 0.565 0.393 0.277 0.210 0.164 0.132 20 30 70 110 180 260 360 520 720 950 1240 1520 32.6 45.2 78.5 111 153 203 255 322 402 489 578 670 0 0 -40 C to +120 C. 1.8 kV AC 0 +280 C. 6kV for 15 mins 3 x OD for Cable dia ≤10mm 5 x OD for Cable dia >10mm As per IEC 332 - 1 CLW/ES/3/0458 DS-1 : : : : : : : 26 AS 9100 ISO 45001 ISO 9001 ISO 14001 RDSO