Diesel Locomotive Cables

Wires & Cables www.siechem.com All information given are in good faith.Siechem's liability is only to replace the defective portion of cables provided the same is mutually established as manufacturing defects within the guarantee period as agreed in writing and Siechem shall not be liable for any compensation or damages. Siechem reserves the right to revise any of the above specifications without prior intimation. Subject to Chennai Jurisdiction. 7 Siechem - CE Certificate Form QAT_10-M05, version 00, effective since March 25th, 2020 Ente Certificazione Macchine Srl Via Ca’ Bella, 243 – Loc. Castello di Serravalle – 40053 Valsamoggia (BO) - ITALY ( +39 051 6705141 6 +39 051 6705156 * info@entecerma.it ý www.entecerma.it Certificate – C ертификат – 證明書 – Certificat – 증명서 – ﺷﮭﺎدة Certificate of Compliance No. 2P200615.STQW85 Certificate’s Holder: Siechem Technologies Pvt. Ltd. Registered Office: 26/27, Errabalu Chetty Street, Chennai - 600 001, Tamil Nadu, India. Works: RS 104/8 & 105/7, Sedarapet Main Road, Pondicherry - 605 111, India. Certification ECM Mark: Product: A. Flexible Wires & Cables 1. PVC / EBXL-XLPO / EVA / TEFLON / RUBBER / SILICON RUBBER / Elastomeric compound / Halogen free compound insulated and unsheathed single core cable with flexible copper conductor. 2. PVC / EBXL-XLPO / EVA / TEFLON / RUBBER / SILICON RUBBER / Elastomeric compound / Halogen free compound insulated, screened (taped or braided) or unscreened, PVC / EBXL-XLPO / RUBBER / SILICON RUBBER / Elastomeric / Halogen free compound outer sheathed multicore cable with flexible copper conductor B. Polyamide flexible conduit C. End fittings and suitable accessories Model(s): (see the following annex) Verification to: Standard: BS 6004:2012, IEC 60228 Ed.3.0 b :2004, UL 1581, UL 83, UL 44, UL 62, UL 2556, UL 4703, UL 2277, UL 1063, UL 758 IEC 60227-1 Ed- 3.0 b :2007, IEC 60227-3 Ed-2.1 b :1997, IEC 60227-4 Ed-2.1 b :1997, IEC 60227-5 Ed-3.0 b :2011, IEC 60227-6 Ed-3.0 b :2001, IEC 60227-7 Ed-1.2 b :2012, IEC 61386-1 Ed- 2.1 b :2017, IEC 61386-23 Ed- 1.0 b :2002, IEC 60423 Ed- 3.0 b :2007, BS EN 50525-1:2011, BS EN 50525-2-11:2011, BS EN 50525-2-21:2011, BS EN 50525-2-31:2011, BS EN 50525-3-11:2011 RDSO/PE/SPEC/0138-2009 (Rev-1): Mar 2012, BS 6231:2006, BS 5308-1:1986, BS 5308-2:1986, BS 6195:2006 (Voltage Category: A, C) related to CE Directive(s): 2014/35/EU (Low Voltage) Remark: This document has been issued on a voluntary basis and upon request of the manufacturer. It is our opinion that the technical documentation received from the manufacturer is satisfactory for the requirements of the ECM Certification Mark. The conformity mark above can be affixed on the products accordingly to the ECM regulation about its release and its use. Additional information and clarification about the Marking: The manufacturer is responsible for the CE Marking process, and if necessary, must refer to a Notified Body. This document has been issued on the basis of the regulation on ECM Voluntary Mark for the certification of products. RG01_ECM rev.3 available at: www.entecerma.it Issuance date: 15 June 2020 Expiry date: 14 June 2025 Reviewer Technical expert Amanda Payne Approver ECM Service Director Luca Bedonni European Conformity Type Approved