Automotive cable

Application Product Construction Technical Data Features Wires & Cables ü Insulation : Electron beam cross linked Polyethylene ü Colour : As per customer order. ü Single core Siechem AESSX RoHS ü Temperature Range : - 40°C to +120°C (3000 Hours) ü Standard : JASO D 608 (Reference) ü Test Voltage : 1 kV ü A : Low tension cables for automobiles ü E : Polyethylene insulated ü SS : Very Thin wall type ü X : Cross linked ü Flame retardant ü Highly resistant against acids, lyes, petrol and diesel. ü Flexible conductor with Electron beam cross linked polyethylene super thin wall insulation for smaller diameter and lesser weight. ü Heat resistant. Nominal Cross- Section No. of Strands Diameter of Single wire max. Conductor Construction Conductor Diameter Approx. Cable Overall Diameter Weight Approx. Max. Insulation Wall Thickness Nom. 2 mm nos. mm mtrs kg/km mm Standard Length* Part Number Current Carrying Capacity mm mm Amps AESSX ü Wire harness of low-tension electric circuits for automobiles. ü Used in motorcycles and other motor vehicles for starting, charging, lighting, signal and instrument panel circuits. ü Especially used for circuits requiring heat resistance. Wires & Cables Note : XX* : Please add last two digits in the part number as per the colour code given hereunder replacing XX while ordering. Red - 01 Yellow - 02 Blue - 03 Black - 04 Green - 05 Yellow-Green - 06 Grey - 07 Brown - 08 White - 09 Orange - 10 Violet - 11 Chocolate - 12 Tan - 13 Charcoal - 14 LT Blue - 15 DK Grey - 16 LT Green - 17 DK Green - 18 DK Blue - 19 Purple - 20 Pink - 21 ü * Other length as per Customer order. 0 0 ü Current Carrying capacity given is for the maximum conductor operating temperature of 120 C and ambient air temperature of 40 C. * Max. Conductor Resistance 0 at 20 C Ω/km ü Conductor : Soft-annealed electrolytic copper E-Cu ETP1 according to JIS C 3102, bare conductor construction according to JASO D 608 (Reference) Catalogue No 815 81554XX 81504XX 81506XX 81512XX 30 www.siechem.com All information given are in good faith.Siechem's liability is only to replace the defective portion of cables provided the same is mutually established as manufacturing defects within the guarantee period as agreed in writing and Siechem shall not be liable for any compensation or damages. Siechem reserves the right to revise any of the above specifications without prior intimation. Subject to Chennai Jurisdiction. 10 5 7 4 21.7 50.2 32.7 14.9 20 12 16 26 0.85 0.3 0.5 1.25 19 7 7 19 0.24 0.26 0.32 0.29 1.2 0.8 1.0 1.5 0.3 0.3 0.3 0.3 1.9 1.5 1.7 2.2 mm Nom. 1.8 1.4 1.6 2.1 1000 500 500 500 Siechem Wires & Cables Meet EU RoHS Directive AS 9100 ISO 45001 ISO 9001 ISO 14001 IATF 16949